Bonneville V8-4.6L VIN Y (2004)
1. Install the seat back pad (2) over the seat back frame (1).
2. Install the seat back cover (2) over the seat back pad (1).
3. Work the foam pad into position so there are no wrinkles or lumps.
4. Ensure the hook and loop fastener on the cover and pad are fully engaged in order to ensure proper fit of the seat back cover.
5. Install the head restraint retainers.
6. Install the Inflatable restraint.
7. Install the shoulder belt retractor.
8. Connect the J channel fastener (1).
9. Connect the J channel fasteners (2,3).
10. Connect the double J channel fastener (5).
11. Connect the J and arrow fasteners (1,4).
12. Install the head restraint.
13. Install the seat cushion.
14. Enable the SIR system. Refer to SIR Disabling and Enabling or SIR Disabling and Enabling in Restraint Systems.