Bonneville V8-4.6L VIN Y (2004)
1. Clean the surface of the BPMV.
2. Install the EBCM (2) to the BPMV (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 6 EBCM to BPMV screws (2).
^
Tighten the 6 screws to 3.2 Nm (28 inch lbs.).
4. Install the BPMV electrical connector (2) to the EBCM (3).
Important: Make sure that all 3 rubber isolators are installed on the BPMV. The isolators protect the EBCM/BPMV assembly from vehicle
vibrations.
