Bonneville V8-4.6L VIN Y (2004)
5. Remove the brake caliper guide pins (3).
6. Remove the brake caliper pin boots (2) from the brake caliper mounting bracket (1).
7. Remove the brake caliper bracket mounting bolts (2).
8. Remove the brake caliper bracket (1) from the knuckle.
9. Inspect the brake caliper bracket (1).
10. Replace the brake caliper bracket if cracked or damaged.
Installation Procedure
1. Install the brake caliper bracket (1) to the knuckle.
Important: If reusing the caliper bracket bolts the threads of the caliper bracket bolts and the threads of the knuckle mounting holes must be free of
residue and debris prior to application of Thread-locker in order to ensure proper adhesion and fastener retention.
2. Prepare the bolts and the, threaded holes for assembly:
2.1.
Thoroughly clean the residue from the bolt threads by using denatured alcohol or equivalent and allow to dry.
