Bonneville V8-4.6L VIN Y (2004)
11. Remove the brake caliper guide pins (3) from the brake caliper mounting bracket (1).
12. Remove the brake caliper pin boots (2) from the brake caliper mounting bracket (1).
Installation Procedure
Important:
^
Ensure that the caliper guide pin boots (2) are fully seated to the caliper guide pin retaining seat (3) of the caliper pin.
^
Ensure that the caliper guide pin boots (2) are fully seated to the caliper boot seal retaining seat (1) of the brake caliper mounting bracket.
1. Apply a thin coat of Niglube (R) GM P/N 18046532 grease to the brake caliper guide pin boots.
2. Install the caliper guide pin boots (2) to the brake caliper mounting bracket retaining seat (1).
