Bonneville V8-4.6L VIN Y (2004)
35. Install the new dust boot seal onto the caliper piston.
36. Insert the caliper piston into the caliper bore, using a spanner type wrench, rotate the piston (2) clockwise to fully seat the piston into the caliper
body (1).
37. Fully Seat the piston dust boot seal in the seal counter-bore.
38. Install the piston dust boot seal retaining ring to the groove in the caliper seal counterbore.
39. Install the caliper bleeder valve to the brake caliper and tighten securely.
40. Apply high temperature silicone brake lubricant to the brake caliper sleeves and the caliper mounting holes.
41. Install the brake caliper sleeve dust boots to the caliper.
42. Install the lubricated caliper sleeves into the caliper mounting holes.
43. Install the brake caliper to the vehicle. Refer to Brake Caliper Replacement - Rear.
Inspect the brake caliper for brake fluid leaks while performing the hydraulic brake system bleeding procedure after the caliper has been installed
to the vehicle. If the brake caliper leaks brake fluid from the FRONT of the caliper past the piston dust boot seal, replace the caliper piston
assembly. The piston integral adjustment mechanism contains a non-serviceable seal which may be allowing brake fluid to leak past it through a
