Bonneville V8-4.6L VIN Y (2004)
7. Remove the brake hose to caliper bolt from the brake caliper.
8. Remove the brake hose from the brake caliper.
9. Place a shop towel on a hard surface.
10. Tap the threaded end of the brake hose-to-caliper bolt on the shop towel to remove the gasket from the bolt.
11. Remove and discard the 2 copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end.
Important: Install a rubber cap or plug to the exposed brake pipe fitting end in order to prevent brake fluid loss and/or contamination.
12. Install a rubber plug into the brake hose to caliper bolt hole of the brake caliper.
13. Remove the hose bracket bolt from the strut assembly and remove the hose.
Installation Procedure