Bonneville V8-4.6L VIN Y (2004)
Brake Hose/Line: Service and Repair
Brake Hose Replacement - Rear
Brake Hose Replacement - Rear (LD8)
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
1. Raise and suitably support the vehicle.
2. Remove the tire and wheel assembly.
3. Clean all dirt and foreign material from the brake hose and the brake pipe fittings.
Important: Install a rubber cap or plug to the exposed brake pipe fitting end in order to prevent brake fluid loss and/or contamination.
4. Disconnect the brake pipe fitting from the brake hose and cap or plug the brake pipe fitting end.
5. Using a flat-bladed tool, remove the brake hose retainer from the brake hose.
6. Remove the brake hose from the brake hose bracket.
