Bonneville V8-4.6L VIN Y (2004)
4. Install the brake hose to the brake hose bracket.
5. Install the brake hose retainer to the brake hose.
6. Remove the rubber cap or plug from the exposed brake pipe fitting end.
7. Install the brake pipe fitting to the brake hose.
^
Tighten the brake pipe fitting to 15 Nm (11 ft. lbs.).
8. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure).
9. Install the tire and wheel assembly.
10. Lower the vehicle.
