Bonneville V8-4.6L VIN Y (2004)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the left front wheel.
3. Remove the left front fascia extension.
4. Remove the air deflector.
Important: The area around the electronic brake control module (EBCM)/brake pressure modulator valve (BPMV) must be free from loose dirt to
prevent contamination of disassembled ABS components.
5. Thoroughly clean all contaminants from around the EBCM/BPMV.
6. Remove the 2 BPMV bracket nuts (2).
7. Remove the 3 BPMV bracket to frame bolts (2).
8. Remove the BPMV bracket (1) from the frame (3).
Installation Procedure