Bonneville V8-4.6L VIN Y (2004)
15. Install the vacuum brake booster check valve to the booster.
16. Connect the brake fluid level sensor wire connector (1).
17. Install the cruise control module (1).
18. Connect the electrical connector (2) to the left strut tower.
19. Connect the electrical connector to the EGR valve (1).
20. Connect the engine harness clips (3).
21. Install the accelerator control cable bracket.
22. Install the air cleaner assembly.
23. Install the air inlet duct.
24. Install the fuel injector sight shield.
25. Remove the blocks from the front wheels.
26. Release, the parking brake.
