Bonneville V8-4.6L VIN Y (2004)
2. Position the condenser, aligning the lower feet to the lower mounting features located at the front of the radiator.
Notice: Refer to Fastener Notice in Service Precautions.
Important: The bolts retaining the condenser to the radiator end tanks are a special length and should be the ONLY bolts used upon reinstallation.
The use of longer bolts will damage the radiator end tanks.
3. Install the condenser mounting bolts.
^
Tighten the bolts to 13 Nm (15 inch lbs.).
4. Install the headlamps.
5. Connect the lower engine oil cooler line to the radiator.
^
Tighten the line to 18 Nm (13 ft. lbs.).
6. Connect the upper engine oil cooler line to the radiator.
^
Tighten the line to 18 Nm (13 ft. lbs.).