Bonneville V8-4.6L VIN Y (2004)
2. Press the crankshaft balancer in place using the J 41998-A.
3. Clean the crankshaft balancer bolt threads.
4. Apply engine oil to the crankshaft balancer bolt threads.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the crankshaft balancer bolt.
5.1.
First Pass
^
Tighten the crankshaft balancer bolt to 50 Nm (37 ft. lbs.).
5.2.
Final Pass
^
Tighten the crankshaft balancer bolt an additional 120 degrees using the J 45059.
6. Raise the engine assembly into position.
7. Install the nut securing the right engine mount to the right engine mount bracket.
^
Tighten the right engine mount nut to 80 Nm (59 ft. lbs.).
