Bonneville V8-4.6L VIN Y (2004)
11. Position the water pump belt tensioner (1) to the water crossover.
^
Tighten the water pump belt tensioner bolts (3) to 10 Nm (89 inch lbs.).
12. Connect the water pump drive belt.
13. Install the water pump drive belt shield.
14. Install the water pump drive belt shield fasteners.
^
Tighten the water pump drive belt shield fasteners to 10 Nm (89 inch lbs.).
^
Tighten the AIR valve bracket nut to 9 Nm (80 inch lbs.).
15. Connect the cable harness clips to the cable harness at the front of the camshaft cover.
16. Install the spark plug boots onto the coil cassette. Ensure that the boots are fully seated against the cassette.
17. Install the ignition coil cassette.
