Bonneville V8-4.6L VIN Y (2004)
2. Install the camshaft cover.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 9 camshaft cover bolts.
^
Tighten the camshaft cover bolts to 10 Nm (89 inch lbs.).
4. Install the spark plug boots onto the coil cassette. Ensure that the boots are fully seated against the cassette.
5. Install the ignition coil cassette.
6. Install the AIR shut off valve bracket.
7. Connect the cable harness clips to the cable harness at the front of the camshaft cover.
8. Connect the AIR vent solenoid electrical connector.
9. Connect the vacuum tubes to the AIR vent solenoid.
10. Connect the oxygen sensor wire.
11. Connect the PCV dirty air tube (2) to the camshaft cover.
