Bonneville V8-4.6L VIN Y (2004)
Notice: Refer to Component Fastener Tightening Notice in Service Precautions.
1. Install the engine oil pressure switch to the oil filter adapter.
^
Tighten the engine oil pressure switch to 16 Nm (12 ft. lbs.).
2. Install the new O-rings. Petrolatum may be used to retain the O-rings in the adapter.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 bolts attaching the oil filter adapter to the engine block.
^
Tighten the oil filter adapter bolts to 16 Nm (12 ft. lbs.).
4. Lightly oil the replacement oil filter gasket with clean oil.
Important: Fill the oil filter with the engine oil.
5. Install the oil filter.
^
Tighten the oil filter to 32 Nm (24 ft. lbs.).