Bonneville V8-4.6L VIN Y (2004)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
^
Tools Required
-
J 42841 Rear Oil Seal Remover
-
J 45930 Crankshaft Rear Oil Seal Installer
Removal Procedure
1. Remove the flywheel.
2. Place the J 42841 onto the crankshaft.
3. Install the J 42841 retaining bolts.
4. Using a drill motor, variable speed preferred, with a socket adapter, install eight 25 mm (1.0 inch) self-drilling screws into the seal using the guide
holes in the removal tool. When drilling, make sure you reduce the drill speed when the screw begins threading into the seal.