Bonneville V8-4.6L VIN Y (2004)
4. Install the left secondary camshaft drive chain guide access plug (4) located in the cylinder head. Ensure the O-ring seal is attached to the access
plug.
^
Tighten the secondary camshaft drive chain guide access plug to 4.5 Nm (40 inch lbs.).
5. Install the left exhaust camshaft sprocket into the left secondary camshaft drive chain.
6. Install the left exhaust camshaft sprocket onto the camshaft. The camshaft sprocket notch marked LE (left exhaust) engages the exhaust camshaft
pin.
7. Use an open end wrench on the hex cast into the camshaft in order to prevent the camshaft from rotating when tightening the camshaft sprocket
bolt.
