Bonneville V8-4.6L VIN Y (2004)
Caution: When installing the intermediate shaft make sure that the shaft is seated prior to pinch bolt installation. If the pinch bolt is inserted
into the coupling before shaft installation, the two mating shafts may disengage. Disengagement of the two mating shafts will cause loss of
steering control which could result in personal injury.
10. Connect the intermediate shaft to the steering gear.
11. Install the intermediate shaft pinch bolt.
^
Tighten the intermediate shaft pinch bolt to 45 Nm (33 ft. lbs.).
12. Connect the real time dampening sensor links (1) to the lower control arms.
13. Position the vehicle speed sensor heat shield (1) to the studs on transaxle.
14. Install the retaining nuts (2, 3) securing the vehicle speed sensor heat shield to the transaxle.
^
Tighten the vehicle speed sensor heat shield nuts to 50 Nm (37 ft. lbs.).
