Bonneville V8-4.6L VIN Y (2004)
2. Connect the SIS connector (2) to the SIS (3).
3. Connect the CPA (1) to the SIS (3).
4. Install the left center pillar trim panel.
5. Install the SIR fuse into the rear fuse center.
6. Install the rear fuse center cover.
7. Install the rear seat.
8. Use caution while reaching in and turn the ignition switch to the ON position. The AIR BAG indicator will flash then turn OFF.
9. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -
Restraint Systems.
