pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 10359 > < SIR Disabling and Enabling Zones|Page 10357
Page 12
background image

2. Connect the vehicle harness yellow connector (2) to the LF side impact module yellow connector (1).
3. Install the CPA (3) to the LF side impact module yellow connector (1).

4. Install the SIR fuse into the rear fuse center.
5. Install the rear fuse center cover.
6. Install the rear seat.
7. Use caution while reaching in and turn the ignition switch to the ON position. The AIR BAG indicator will flash then turn OFF.
8. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -

Restraint Systems.

SIR Disabling and Enabling Zone 8

SIR DISABLING AND ENABLING ZONE 8

DISABLING PROCEDURE

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.

SIR Disabling and Enabling Zones|Page 10359 > < SIR Disabling and Enabling Zones|Page 10357