Bonneville V8-4.6L VIN Y (2004)
Turn Signal Lamp: Description and Operation
TURN SIGNAL LAMPS
The T/SIG HAZ fuse in the fuse block - rear supplies battery positive voltage to the turn signal/hazard flasher module. The module is part of the hazard
switch assembly. The turn signal/hazard flasher module has ground at G201. The turn signal lamps may only be activated with the ignition switch in the
ON or ACCY position. The IGN-1 fuse in the fuse block - rear supplies battery positive voltage to the turn signal switch. When the turn signal switch is
placed in either the left or right position, current flow is from the turn signal/multifunction switch assembly to the turn signal/hazard flasher module. The
turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals, their instrument cluster (IPC) indicator and
head up display (HUD) indicator if HUD equipped. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal
indicators. The left turn signals have ground at G103 and at G402. The right turn signals have ground at G103 and G401.
