Bonneville V8-4.6L VIN Y (2004)
7. Remove the Connector Position Assurance (CPA) (1) from the RF/passenger side impact module yellow connector (3) which is located under the
passenger seat.
8. Disconnect the vehicle harness yellow connector (2) from the RF side impact module yellow connector (3).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. Connect the vehicle harness yellow connector (2) to the RF side impact module yellow connector (3).
3. Install the CPA (1) to the RF side impact module yellow connector (3).
4. Install the SIR fuse into the rear fuse center.
5. Install the rear fuse center cover.
6. Install the rear seat.