pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Replacement|Page 6144 > < Underhood Electrical Center or Junction Block Replacement|Page 6142

Bonneville V8-4.6L VIN Y (2004)

Page 3
background image

11. Remove the underhood fuse block base fasteners.
12. Remove the underhood fuse block base assembly.

INSTALLATION PROCEDURE

1. Install the underhood fuse block base into the vehicle.

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the underhood fuse block fasteners.

Tighten
Tighten the fasteners to 9 N.m (80 lb in).

3. Connect the engine harness connector to the underhood fuse block.

Underhood Electrical Center or Junction Block Replacement|Page 6144 > < Underhood Electrical Center or Junction Block Replacement|Page 6142