Bonneville V8-4.6L VIN Y (2004)
Ignition Coil: Service and Repair
Ignition Coil(S) Replacement - Bank 2
IGNITION COIL(S) REPLACEMENT - BANK 2
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Remove the upper filler panel, if necessary, to gain access to the individual coil being serviced.
3. Remove the ignition coil cover from the cam cover by lifting straight up, if equipped.
4. Disconnect the ignition coil wiring harness electrical connector from the coil that needs to be replaced.
5. Remove the ignition coil retaining bolt.
6. Carefully remove the ignition coil assembly.
7. If removal of all the coils are necessary, disconnect the main coil wiring harness at the cam cover.
