Bonneville V8-4.6L VIN Y (2004)
Technical Service Bulletin # 08206A
Date: 090130
Recall - PCM Update For Air Injection Function
# 08206A: Product Emission - Secondary Air Injection (SAI) System Disabled-Reprogram Powertrain Control Module - (Jan 30, 2009)
Subject:
08206A -- Secondary Air Injection (SAI) System Disabled - Reprogram Powertrain Control Module
Models:
2004 Cadillac SLS, STS
2004-2005 Cadillac DeVille, DHS, DTS
2004-2005 Pontiac Bonneville
Equipped with 4.6L V8 (RPO LD8, L37 - VIN Y, 9) Engine built after March 2004
THIS BULLETIN IS BEING REVISED TO ADD 2004 MODEL YEAR CADILLAC AND PONTIAC VEHICLES. PLEASE DISCARD ALL COPIES
OF BULLETIN 08206, ISSUED NOVEMBER, 2008.
Condition
General Motors has decided to conduct a Voluntary Emission Recall involving certain 2004 model year Cadillac SLS, STS; 2004-05 model year
Cadillac DeVille, DHS, DTS; and Pontiac Bonneville vehicles, equipped with a 4.6L V8 (RPO LD8, L37 - VIN Y, 9) engine. The secondary air
injection (SAI) system may have been disabled as the result of a previous service procedure that included Powertrain Control Module (PCM)
reprogramming or replacement.
Correction
Dealers are to reprogram the Powertrain Control Module (PCM) and verify SAI system operation.
Vehicles Involved
Important:
Dealers are to confirm vehicle eligibility prior to beginning repairs by using GMVIS.
Not all vehicles within the above breakpoints may be involved. For dealers with involved vehicles, a listing of the involved vehicles containing the
complete vehicle identification number, customer name, and address information has been prepared and will be provided through the applicable system
listed below. Dealers will not have a report available if they have no involved vehicles currently assigned.
-
US and Canadian dealers/retailers - GM GlobalConnect Recall Reports
-
Export dealers - sent directly to dealers
The listing may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration
data for any purpose other than follow-up necessary to complete this recall is a violation of law in several states/provinces/countries. Accordingly, you
are urged to limit the use of this report to the follow-up necessary to complete this recall.
Calibration Information
Do not attempt to order the calibration number from GMSPO. The calibration numbers required for this service procedure are programmed into control
modules via a Multiple Diagnostic Interface (MDI) or Tech 2(R) scan tool and TIS2WEB with the calibration update. Use TIS2WEB data version on or
after 05/26/08 to obtain the calibration. If you cannot access the calibration, call the Techline Customer Support Center and it will be provided.
