Bonneville V8-4.6L VIN Y (2004)
4. Remove the rear seat.
5. Locate the rear fuse center under rear seat, then remove the fuse center top cover.
IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.
6. Locate and remove the SIR fuse from the rear fuse center.
7. Remove the Connector Position Assurance (CPA) (1) from the RF/passenger side impact module yellow connector (3) which is located under the
passenger seat.
8. Disconnect the vehicle harness yellow connector (2) from the RF side impact module yellow connector (3).
9. Remove the right insulator panel.
10. Remove the CPA (4) from the vehicle harness yellow connector (2) located below I/P (3).
11. Disconnect the I/P module yellow connector (1) from the vehicle harness yellow connector (2).
