Bonneville V8-4.6L VIN Y (2004)
Air Bag: Service and Repair
Instrument Panel Module Replacement
INFLATABLE RESTRAINT INSTRUMENT PANEL MODULE REPLACEMENT
REMOVAL PROCEDURE
CAUTION:
-
Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.
-
A deployed dual stage inflator module will look the same whether one or both stages were used, always assume a deployed dual stage
inflator module has an active stage 2. Improper handling or servicing can activate the inflator module and cause personal injury.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5.
2. Remove right closeout/insulator panel.
3. Remove the connector position assurance (CPA) (4) from the inflatable restraint instrument panel (I/P) module connector (2).
4. Remove the I/P module yellow connector (2) from the vehicle harness yellow connector (1).
5. Remove the I/P module yellow connector (2) from the I/P bracket (3).
6. Remove the I/P upper trim pad.
7. Note the wire harness routing position of the inflatable restraint I/P module.
8. Push the yellow connector (2) of the inflatable restraint module away from the I/P (3).