Bonneville V8-4.6L VIN Y (2004)
5. Route the wiring harness (2) in place to secure the yellow 2-way connector clip to the I/P (3).
6. Install the I/P upper trim pad.
7. Clip the inflatable restraint I/P module yellow connector (2) to the I/P bracket (3).
8. Install the I/P module yellow connector (2) to the vehicle harness yellow connector (1).
9. Install the CPA (4) to the inflatable restraint I/P module connector (2).
10. Install the right closeout/insulator panel.
11. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5.
