Bonneville V8-4.6L VIN Y (2004)
module, stage 2 may still be active. If disposal of a deployed or undeployed dual stage module is required both deployment loops must be energized to
deploy the air bag.
8. If you have a steering wheel inflator module, place the inflator module in the center of the space.
9. If you have an I/P inflator module, refer to the following instructions:
9.1.
Place the J 39401-B SIR deployment fixture (2) in the center of the cleared area.
9.2.
Fill the deployment fixture with water or sand.
9.3.
Using the proper nuts and bolts, mount the I/P module (1) to the deployment fixture (2), with the vinyl trim facing up.
9.4.
Tighten all fasteners that hold the I/P module (1) to the deployment fixture (2).
10. If you have a side impact module, refer to the following instructions:
10.1. Place the J 39401-B SIR deployment fixture (3) in the center of the cleared area.
10.2. Fill the deployment fixture with water or sand.
10.3. Using the proper nuts and mount the side impact module (1) to the deployment fixture (3), with the vinyl trim facing up.
10.4. Adjust and secure the fixture arms (4) to the deployment fixture (3).
10.5. Securely tighten all fasteners that hold the side impact module (1) to the deployment fixture (3).
