Bonneville V8-4.6L VIN Y (2004)
30. Bend flat the twisted connection.
31. Secure and insulate the connection using electrical tape.
32. Twist together, bend, and tape the remaining connector wire lead to the remaining deployment wire.
33. Connect the deployment harness to the side impact module - LF.
34. Route the deployment harness out of the driver side of the vehicle.
35. Disconnect the I/P module yellow harness connector (2) above passenger side sound insulator.
IMPORTANT: If vehicle is equipped with dual stage air bags the I/P module will each have 4 wires. Refer to SIR Connector End Views for
determining high and low circuits.
