Bonneville V8-4.6L VIN Y (2004)
6. Remove only the top and the bottom fasteners (1) from the side impact inflator module.
7. Remove the side impact inflator module (1) from the seat (2).
8. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required
retention period. Refer to Inflator Module Handling and Scrapping.
9. Remove the connector position assurance (CPA) (4) from the electrical connector (5) on the side impact inflator module.
10. Remove the electrical connector (5) from the side impact inflator module (1).
INSTALLATION PROCEDURE
IMPORTANT: Replace both retainer fasteners (3,6) to insure proper inflator module positioning.
