Bonneville V8-4.6L VIN Y (2004)
Seat Belt Buckle: Service and Repair
Rear
SEAT BELT BUCKLE REPLACEMENT - REAR
REMOVAL PROCEDURE
NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.
1. Remove the rear seat cushion.
2. Remove the rear seat belt and buckle anchor fastener.
3. Slide the rear seat buckle anchor plate out from under the rear seat back hold-down.
4. Remove the rear seat buckle.
INSTALLATION PROCEDURE
1. Install the rear seat belt buckle anchor plate under the rear seat back hold-down.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Assure that the fastener threads and fastener hole are free of any sealer patch material.
2. Install the rear seat center belt and RH rear seat buckle anchor fastener. Ensure the center belt anchor is facing rearward and the center buckle
anchors are facing towards the rear.
Tighten
Tighten the rear seat center belt and rear seat buckle anchor fasteners to 36 N.m (26 lb ft).
