Bonneville V8-4.6L VIN Y (2004)
Seat Belt Buckle: Service and Repair
Front
SEAT BELT BUCKLE REPLACEMENT - FRONT
REMOVAL PROCEDURE
NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.
1. Remove the seat adjuster track trim cover.
2. Note the seat buckle wire routing for installation.
3. Disconnect the electrical connector on the drivers buckle.
4. Remove the fastener.
5. Remove the buckle assembly.
INSTALLATION PROCEDURE
1. Install the buckle assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fastener.
Tighten
Tighten the fastener to 26 N.m (19 lb ft).
3. Route the wire as noted in the removal procedure.
4. Connect the electrical connector to the drivers seat.
5. Install the seat adjuster track trim cover.