Bonneville V8-4.6L VIN Y (2004)
Tighten the screws to 7 N.m (62 lb in).
3. To install the windshield washer and wiper switch assembly go to step 7.
IMPORTANT: The switch mounting bracket must be pressed firmly against the steering column tilt head in order for the screws from the turn signal
and multifunction switch assembly screws to line up.
4. Slide the switch mounting bracket onto the steering column shaft assembly.
5. Install the turn signal and multifunction switch assembly only.
6. Install the turn signal cancel cam and steering shaft upper bearing spring.
7. If necessary, install the switch assembly into the switch mounting bracket so that the locking tabs snap into place.
8. Connect the wire harness assembly.
9. Install new wire harness straps.