Bonneville V8-4.6L VIN Y (2004)
9. Remove the power steering pressure hose from the vehicle.
Installation Procedure
1. Install the power steering pressure hose (4) to the vehicle.
2. Connect the power steering pressure hose (1) to the bracket (2) at the frame.
Notice Refer to Fastener Notice in Service Precautions.
3. Connect the power steering pressure hose fitting to the power steering gear.
^
Tighten the fining to 27 Nm (20 ft. lbs.).
4. Install the power steering pressure hose bracket to the cylinder head.
^
Tighten nut (2) to 9 Nm (80 inch lbs.).
5. Install the fascia extension panel.
6. Install the power steering gear heat shield
7. Lower the vehicle.