Bonneville V8-4.6L VIN Y (2004)
7. Remove the outer tie rod retaining nuts.
8. Using J 24319-B separate the outer tie rod from the steering knuckles.
9. If equipped, disconnect the variable effort steering electrical connector from the power steering gear.
10. Remove the power steering gear pressure and return hoses (1,4) from the power steering gear.
11. Remove the left stabilizer shaft insulator.
12. Remove the power steering gear mounting bolts.
13. Remove the power steering gear through the left wheel opening.
14. Transfer the outer tie rods if replacing the power steering gear.
Installation Procedure