Bonneville V8-4.6L VIN Y (2004)
Control Arm: Service and Repair
Rear Suspension
Rear Axle Lower Control Arm Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear suspension support assembly.
3. Remove the automatic level control height sensor link on the left control arm.
4. Remove the stabilizer link bolt and the nut.
5. Disconnect the antilock brake electrical connector.
6. Remove the wheel bearing and hub assembly.
Refer to Wheel Bearing/Hub Replacement - Rear.
7. Remove the adjustment link retaining nut.