pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Compressor/Pump, Suspension Control > < Air Line, Suspension Control|Service and Repair|Page 6626
Page 3
background image

5. Install 2 metal clips on the air tube and the vehicle. Place each clip immediately forward of the wheel house fold-over tabs on the LH and RH side

of the vehicle.

6. Install both rear wheels. 

Important:  Before driving the vehicle, turn the ignition on and wait approximately 45 seconds. This will ensure that the air adjustable shock
absorbers are filled with residual pressure.

7. Lower, the vehicle. Refer to Vehicle Lifting.

Compressor/Pump, Suspension Control > < Air Line, Suspension Control|Service and Repair|Page 6626