pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Suspension - Clunk Noise From Rear on Hard Launch|Page 6647 > < Air Compressor Replacement|Page 6638
Page 1
background image

Ride Height Sensor: Customer Interest
Suspension - Clunk Noise From Rear on Hard Launch

Bulletin No.: 04-03-09-002

Date: March 12, 2004

TECHNICAL

Subject:
Creak/Squeak Type Noise From Rear Of Vehicle During Slow Speed Turns (Lubricate Automatic Level Control Sensor Link Sockets)

Models:
2004 Buick LeSabre
2004 Cadillac DeVille
2004 Pontiac Bonneville 

Condition

Some customers may comment on a creak/squeak type noise from the rear of the vehicle during slow speeds and slow turns.

Cause

This condition may be due to insufficient lubrication on the ball stud on the automatic level control sensor assembly.

Correction

1.

Raise the vehicle. 

2.

Remove the automatic level control sensor link from the ball studs.

3.

Clean the ball studs and the sensor link sockets of dirt and debris.

4.

Apply a lubricant such as GM Vehicle Care Super Lube(R), P/N 12346241 (U.S.) 10953474 (Canada), GM Vehicle Care Lubriplate(R), P/N
89021668 (U.S.) 89021674 (Canada), or equivalent, to both sensor link sockets.

5.

Install the automatic level control sensor link to the ball studs.

6.

Lower the vehicle.

Suspension - Clunk Noise From Rear on Hard Launch|Page 6647 > < Air Compressor Replacement|Page 6638