Bonneville V8-4.6L VIN Y (2004)
Suspension Spring ( Coil / Leaf ): Service and Repair
Coil Spring Insulators Replacement
Coil Spring Insulators Replacement
^
Tools Required
-
J 24319-8 Universal Steering Linkage Puller
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Support the control arm with a jack stand.
4. Remove the automatic level control air tube from the shock.
5. Remove the shock to control arm retaining bolts.
6. Remove the adjustment link retaining nut.
Notice When separating a linkage joint, DO NOT try to disengage the joint by driving a wedge between the joint and the attached part. Seal Damage
may result.
7. Separate the adjustment link from the knuckle using the J24319-B.
8. Slowly lower the control arm onto the support assembly,