Bonneville V8-4.6L VIN Y (2004)
9. Pry under the lower spring insulator. Remove the spring with the insulator.
10. Remove the jounce bumper, if necessary, by pulling downward.
Installation Procedure
1. Install the jounce bumper by inserting the retainer into the body of the vehicle.
2. Install the spring and the lower insulator. Ensure that the insulator is seated in the control arm.
Notice Refer to Fastener Notice in Service Precautions.
3. Raise the control arm, Install the shock bolts to the control arm.
^
Tighten the shock to control arm retaining bolts to 24 Nm (18 ft. lbs.).
