Bonneville V8-4.6L VIN Y (2004)
15. Remove the dial indicator set and the post.
16. Install the stud (127).
^
Tighten the bolt (128) and the stud (127) to 50 - 55 Nm (37 - 40 ft. lbs.).
^
Tighten the bolt (129) to 20 - 27 Nm (15 - 20 ft. lbs.).
17. Install the transmission brace.
18. Install the vehicle speed sensor.
19. Install the ground wire to case.
20. Install the wiring harness.
21. Install the right drive axle.
22. Remove the safety stands.
23. Lower the vehicle.
24. Fill the transmission with fluid.
25. Check the fluid level.
