Bonneville V8-4.6L VIN Y (2004)
Important: When reusing the window belt seal strip, the flange mounting area (2) must be pinched together in order to counteract the
splaying effect when removed. Use a thumb and an index finger in order to pinch the carrier (3) back together.
2. Work from one end of the seal strip to the other.
3. Position the door window inner belt seal strip over the flange of the door inner panel.
Important: Do not distort the seal strip.
4. Press down in order engage the door window inner belt seal strip the entire length of the door.
5. Install the door trim panel.
Front Side Door Window Belt Outer Sealing Strip Replacement
Front Side Door Window Belt Outer Sealing Strip Replacement
Removal Procedure
1. Remove the outside rearview mirror.
2. Lower the front door window.
3. Remove the front door outer belt sealing strip from the door pinchweld flange.
1. Lift upwards, starting at the rear, to disengage the sealing strip clips.
2. Slide the sealing strip rearward to clear the upper auxiliary molding.
Installation Procedure
1. Install the front door outer belt sealing strip to the pinchweld flange.
1. Align sealing strip to door.
