Fiero L4-151 2.5L (1985)
FIGURE 1 - TYPICAL SPOT/PARTIAL REPAIR USED ONLY ON QUARTER & ROOFS
1.
Prime repair area.
2.
Wet sand area to be primed and color coated with 400 grit or finer.
3.
Wet sand with 600 grit or finer or hand compound (follow manufacturers' recommendations).
4.
Apply adhesion promoter over entire panel and blend a minimum of 4-6" into adjacent area.
5.
Apply basecoat per label directions.
6.
Apply clearcoat over entire panel and blend into adjacent area within adhesion promoter.