Fiero L4-151 2.5L (1985)
1.
Lubricate, then install bushings into mounting bolt hole grooves.
2.
Lubricate, then install sleeves into mounting bolt holes.
3.
Install inboard shoe and lining onto caliper. Ensure that tabs on inboard shoe are positioned so that they fit into corresponding holes in face
of piston.
4.
Install outboard shoe and lining onto caliper. Ensure wear sensor is positioned at leading edge of brake shoe.
CALIPER INSTALLATION
1.
Install caliper onto brake rotor mounting bracket.
2.
Using silicone grease or equivalent, liberally coat shoulder and mounting bolt threads so caliper cavity will be filled.
3.
Install caliper mounting bolts. Torque bolts to 21---35 ft. lbs.
