Fiero L4-151 2.5L (1985)
Tail Lamp Pigtail Assembly: Technical Service Bulletins
Cruise Control - Add On Kits Incomplete
Number
85-9-7
Date
8/85
Subject:
CRUISE CONTROL KITS
1985 FIERO
CONDITION:
Cruise Control Accessory kits are incomplete to make a functional cruise system.
CAUSE:
There are no electrical connections for the servo and vacuum valve on the tail lamp wiring harness unless Option K34 (cruise control) is ordered
originally by the dealer.
CORRECTION:
^
To install a Cruise Control Accessory kit, the tail lamp harness must be replaced with the following assemblies:
1.
2.5 liter engine (L4) - 20481682
2.
2.8 liter engine (V6) - 20603497
^
To install either harness requires loosening the roof panel to raise the rear quarter panels. The cruise control wiring is already in the body harness,
but it is not in the original rear end harness unless Option K34 was originally ordered.
