Fiero L4-151 2.5L (1985)
Alignment: All Technical Service Bulletins
Alignment - Precautions For Rear Suspension
Number
85-3-22
Date
12/85
Subject:
REAR SUSPENSION ALIGNMENT
ALL FIERO
When checking or adjusting the Fiero rear suspension alignment, it should be remembered that it is very much like the X car front suspension design with
the exception of the toe adjustment. The Fiero uses a toe link rod, which is mounted to the engine cradle and the knuckle assembly. When adjusting
toe-in on a two wheel aligner, the vehicle must be backed onto alignment equipment. If the equipment does not compensate for rear measurements,
toe-in will read on the equipment as toe-out.
