Fiero L4-151 2.5L (1985)
FIGURE 6 - NEW DIRECT CLUTCH SNAP RING POSITION
SERVICE NOTE:
THE SNAP RING THAT RETAINS THE APPLY RING AND RELEASE SPRING ASSEMBLY MAY NOT APPEAR TO BE
FULLY SEATED IN THE SNAP RING GROOVE WHEN INSTALLED. THIS IS DUE TO THE GROOVE NOT BEING CUT
AS DEEP AS PREVIOUS MODEL YEARS (SEE FIGURE B). WHEN INSTALLING THE SNAP RING, USE A DOWNWARD
AND OUTWARD PRESSURE TO ENSURE PROPER SEATING (SEE FIGURE A).
