Fiero L4-151 2.5L (1985)
FIGURE 1
Reference Figure #1.
1.
Cause: Pedal pivot noise due to (1) insufficient lube; (2) deflection, resulting in uneven loading on the pivot bushings, or (3) pedal return spring
noise.
Action:
Same as #1 of CLUTCH WEAR Section.
NOTICE:
SPRAYING OR SQUIRTING LUBRICANT TO THESE AREAS (WITHOUT PERFORMING THE ABOVE ACTION) WILL
ONLY TEMPORARILY ELIMINATE THE NOISE.
2.
Cause: Push rod pin pivoting noise due to misalignment between the master cylinder and pedal (pedal deflection and/or bent clutch pedal
