Fiero V6-173 2.8L (1986)
FIGURE 11 - CALIPER ASSEMBLY
FIGURE 12 - REMOVING PISTON
1.
Caliper completely from vehicle as previously described.
2.
Piston (9) using compressed air into the caliper inlet hole (Figures 11 & 12).
CAUTION: Do not place fingers in front of the piston in an attempt to
catch or protect it when applying compressed air. This could result in serious injury.
Important
^
Use clean shop towels to pad the interior of the caliper (13) during removal.
v Inspect
^
Piston (9) for:
-
- Scoring
-
- Nicks
-
- Corrosion
-
- Worn or damaged chrome plating